Zte H108N - WPS Setup

ZTE H108N V.2.1 Configuration manual
Page 41 ZTE Proprietary and Confidential
3.1.3 Security Settings
Select Security Settings. The page shown in the following figure appears.
Select the SSID that you want to configure from the drop-down list. Select the
encryption type from the Security Mode drop-down list. You can select None,
WEP, AUTO (WPA or WPA2), WPA Only or WPA2 Only. The defaulted security
mode is WPA only. For detailed configuration, you may refer to 2.3.2 Wireless
Security.