Zte H108N - IPv6 LAN Configuration

ZTE H108N V.2.1 Configuration manual
Page 32 ZTE Proprietary and Confidential
with the MAC address, for example, Father’s Laptop. Click Apply to save the
settings.
After the DHCP reservation is saved, the DHCP reservations list displays the
configuration.
The NUMBER OF DYNAMIC DHCP CLIENTS page shows the current DHCP
clients (PC or Laptop) connected to the device and the detailed information of the
connected computer(s).
You can query from here easily the MAC address of your videogame or computer,
if you want to reserve it a “fixed IP” (DHCP Reservation) as explained before.
2.5 Local IPv6 Network
The IPv6 is the new standard for networking. It allows new functionality and much
more addresses than the previous one which was running short - so many
address that it can be considered unlimited. It had its premiere on 6
th
June 2012
by some important Internet companies like Google®, Facebook®, Microsoft®,
Movistar®, etc.
For the above reason, the “Local IPv6 network” is normally used together with
“Internet Setup” checking IPv6 too. This way you enable IPv6 on both sides and
you are able to browse “pure-IPv6” web sites in a standard way. All these IPv6
options are enabled by default in the router ZTE H108N V2.1.
Note:
Windows has a built-in feature called “Teredo”. To ensure compatibility
it will always send the IPv6 through the “old network” (encapsulated).
In this way even you are still using the old network, the new IPv6 web
sites will work for you. This is okay while the older networks still exist.