Zte H108N - Firmware Update

ZTE H108N V.2.1 Configuration manual
Page 54 ZTE Proprietary and Confidential
Update setting
Click Browse to select the configuration file of device
and then click Update Settings to begin updating the
device configuration.
Restore Default
Setting
Click this button to reset the device to default settings.
Note:
Do not turn off your device or press the Reset button while an
operation in this page is in progress.
4.3 Firmware Update
Choose MANAGEMENT > Firmware Update. The page shown in the following
figure appears. In this page, you can upgrade the firmware of the device.
To update the firmware, take the following steps.
Step 1 Click Browse…to find the file.
Step 2 Select Click Config.
Step 3 Click Update Firmware to copy the file.