ZTE H108N V.2.1 Configuration manual
Page 42 ZTE Proprietary and Confidential
3.1.4 WPS Settings
The WPS helps your computer PC to connect easily to the WIFI network using a
small PIN number or without password at all with the push of a button.
By default, the router brings WPS in “enrollee mode” and the WPS led turned on.
When your computer wants to connect to a WiFI network for the first time
(Windows Vista or above), it will display a window to ask for a password or
alternatively “push the button on the router”.
Note:
Press for 5 seconds the small black button labeled “Wifi/WPS” on the
back of the router, and the WPS led will blink green. This will allow just
ONE device (your PC) to register into the WiFI network without
password during the next 150 seconds. Once done correctly your PC
will remember and login automatically in the future.
Note:
Pressing less than 1 second the button “Wifi/WPS” will disable the
WiFI network. Press again to enable it back. This functionality is used
by many people that want to turn off the WiFI at night time for security
reasons, or even to save electric power consumption.
Select WPS Settings. This page is used to config WPS settings.
To Next Page
Loading...
