ZTE H108N V.2.1 Configuration manual
Page 19 ZTE Proprietary and Confidential
The following table describes the parameters in the previous page.
VPI: The virtual path between two points in an ATM
network and its valid value is from 0 to 255.
VCI: The virtual channel between two points in an ATM
network, ranging from 32 to 65535 (0 to 31 is reserved
for local management of ATM traffic).
You can select from the drop-down list.
You can select from the drop-down list.
Please see the explanation note bellow this table for
more advanced information.
Select the method of encapsulation provided by your
ISP. You can select LLC or VCMUX.
To Next Page
Loading...
