Zte H1600 - Page 17

SJ-20210621164956-008 | 2022-09-01(R1.3)
9
2 Product Overview
LED Indicator
Status
Description
Solid green
WPS access is successful. This solid-on light will be au-
tomatically off after 10 seconds.
Flashing slowly green
WLAN terminal is in WPS accessing process.
Flashing fast green
The WPS accessing of the WLAN terminal is faulty.
USB
Off
The device is powered off or the USB interface is not
connected.
Solid green
The USB interface is connected with USB device.
Phone
Off
The device has not been registered to the VoIP network.
Solid green
The device has registered to the VoIP network.
Flashing green
The incoming VoIP call set-up is in progress.
Service
Off
No action related to reset factory default or upgradation.
Flashing yellow
The device is FW upgrading or the configuration file is
upgrading.
*LAN1\LAN2\
LAN3\LAN4
Off
The LAN connection has not been established.
Solid green
The LAN connection has been established.
Flashing green
Data transmission is in processing, The indicator flashes
according to the LAN traffic.
⚫
The LAN1\LAN2\LAN3\LAN4 status indicator is on the LAN1\LAN2\LAN3\LAN4 port of the ZTE
H1600.
Figure 2-2 shows the buttons on the top panel of the ZTE H1600.
Figure 2-2 The Top Panel
Table 2-3 describes the buttons on the top panel of the ZTE H1600.
Top Panel