SJ-20210621164956-008 | 2022-09-01(R1.3)
4 Configure the Internet
Figure 4-8 DSL Connection page
Table 4-1 lists the new item parameters.
Table 4-1 DSL Connection Parameter Descriptions
There are two xDSL transfer modes: ATM, PTM.
If DSL Transfer Mode is selected to be ATM, the VPI/VCI val-
ues provided by the ISP needs to be configured.
VPI Range: 0 - 255
VCI Range: 0 - 65535
If DSL Transfer Mode is selected to be ATM, Service Type
needs to be configured.
ATM QoS used to limit the transmission of uplink traffic.
The options are: UBR, CBR, VBR-nrt, and VBR-rt.
If Service Type is selected to be CBR,VBR-rt or VBR-nrt, PCR
needs to be configured.
To Next Page
Loading...
