SJ-20210621164956-008 | 2022-09-01(R1.3)
4 Configure the Internet
Configure the filter switch and mode configuration
1.
On the main page of the ZTE H1600, select Internet > Security > Filter Criteria to
open the Filter Criteria page.
2.
Click Filter Switch and Mode Configuration to open the configuration page, see
Figure 4-13.
Figure 4-13 Filter Switch and Mode Configuration
3.
Configure filter switch and mode configuration parameters, see Table 4-5 .
Table 4-5 Parameter Descriptions for the Filter Switch and Mode Configuration
Select On to enable the MAC filter function.
There are two modes:
⚫
Black List: black list addresses in the MAC filter list are
not allowed to access.
⚫
White List : white list only addresses in the MAC filter
list can be accessed.
Set radiobox On to enable the URL filter function.
There are two modes:
⚫
Black List: black list addresses in the URL filter list are
not allowed to access.
⚫
White List : white list only addresses in the URL filter list
can be accessed.
4.
Click Apply button to apply the changes.
Configure the IP filter
1.
Click IP Filter to open the IP filter page, see Figure 4-14.
To Next Page
Loading...
