2 Product Overview
Figure 2-4 The Rear Panel
Interface/Button Function
WiFi WLAN switch , it is used to turn on / off the WLAN.
WPS WPS Push Button.
Reset During power ON period, hold on this button for more than 5 seconds to
reset the current settings to the factory default setting, and then the sys-
tem restarts automatically.
On/Off Power switch, to power on or power off the device.
Power Power supply port, It is connected to the power adapter.
Tel1
Tel2
RJ-11 port, it is used to connect to the analog telephone.
USB2 USB 2.0 host port, it is used to connect to USB storage device.
LAN1-LAN3 RJ-45 port, it is used to connect the modem to computer , STB or other
network devices.
LAN4/WAN RJ-45 port, it is used to connect to the uplink Ethernet access network
Fibra Optical port, it is used to connect to the uplink PON network.
SJ-20210621164956-009 | 2021-12-07(R1.0) 9
To Next Page
Loading...
