H3140 Maintenance Management Guide
Parameter Description
UPDATE
The UPDATE message is a mechanism for SIP extension. It updates
the media stream status when a call is not established.
9. Click Apply button to apply the changes.
6.4 Configure the SIP Protocol
Abstract
This procedure describes how to configure the SIP Protocol, include the proxy port,
proxy server and registrar server,
Steps
1. On the main page of the H3140, select VoIP > SIP Protocol. The SIP Protocol page
is displayed, see Figure 6-6.
Figure 6-6 SIP Protocol Page
2. Set the parameters. For a description of the parameters, refer to Table 6-5.
70 SJ-20210621164956-009 | 2021-12-07(R1.0)
To Next Page
Loading...
