7 Configure the Management and Diagnosis
Figure 7-5 Software Upgrading Page
2. Click Browse to select the upgrade version file.
3. Click Upgrade.
Note
The system prompts the upgrade progress. During the upgrade process, do not cut
off the power supply. Otherwise, the device may be damaged.
Generally, the software is upgraded by the ZTE CORPORATION engineers. If the
user wants to upgrade the Firmware, contact the local office of ZTE CORPORATION
to obtain the latest Firmware version.
7.4.3 Configure the User Configuration Management
Abstract
This procedure describes how to back up or restore your user configuration file. The
backup operation is used for routine maintenance, and the restoration operation is used
for troubleshooting.
Steps
1. In the left navigation tree, click Administration > System Management > User
Configuration Management. The User Configuration Management page is dis-
played, see Figure 7-6.
SJ-20210621164956-009 | 2021-12-07(R1.0) 79
To Next Page
Loading...
