Zte H3140 - Account Management

7 Configure the Management and Diagnosis
Parameter Description
Old Password The default passwords for the Administrator is Admin.
New Password Specify the new password.
Confirmed Password Confirm the new password.
3. Click Apply button to apply the changes.
7.3 Configure the Login Timeout
Abstract
This procedure introduces how to configure the login timeout.
Steps
1. On the main page of the H3140, select Management&Diagnosis > Idle Timeout to
the Idle Timeout page, see Figure 7-3.
Figure 7-3 Idle Timeout Configuration Page
2. Specify the time in the Timeout text box, rang: 1-30 min.
3. Click Apply button to apply the changes.
7.4 Configure the System Management
7.4.1 Configure the Device Management
Abstract
This procedure introduces how to reboot the device or restore the factory default set-
tings.
Steps
1. On the main page of the H3140, select Management&Diagnosis > System Man-
agement > Device Management to the Device Management page, see Figure 7-4.
SJ-20210621164956-009 | 2021-12-07(R1.0) 77