Zte H3140 - Configure the LAN(Ipv6)

H3140 Maintenance Management Guide
Table 5-9 lists the DHCP binding parameters.
Table 5-9 Parameter Descriptions for the DHCP Binding
Parameter Description
Name The name of the DHCP Binding.
IP Address IP address of the DHCP Binding.
MAC Address The MAC address of the DHCP Binding.
9. Click Apply button to apply the changes.
5.3.2 Configure the LAN(IPv6)
Abstract
The section describes how to configure LAN(IPv6).
The relevant information of Internet status includes Allocated Address(DHCPv6), LAN
Address Management, Static Prefix, DHCPv6 Server, RA Service.
Prerequisite
Before configuring the prefix delegation, make sure that the prefix delegation is enabled
for the specified IPv6 WAN connection.
Steps
Configure Allocated Address(DHCPv6)
1. On the main page of the H3140, select Local Network > LAN > IPv6 to the IPv6
page.
2. Click Allocated Address (DHCPv6) to the configuration page, see Figure 5-12.
Figure 5-12 Allocated Address(DHCPv6) Page
3. Click Refresh to refresh the information.
Configure LAN Address Management
4. Click LAN Address Management to the configuration page, see Figure 5-13.
52 SJ-20210621164956-009 | 2021-12-07(R1.0)