Zte H3140 - Configure QoS

4 Configure the Internet
4.3.1 Configure the QoS Global Parameters
Abstract
This procedure describes how to configure the function of QoS switch and other global
parameters configuration. Packets that match no classification rules will be processed
according to the default policy showed in this page.
Steps
1. On the main page of the H3140, select Internet > QoS > QoS Global Configuration
to the QoS Global Configuration page, see Figure 4-8.
Figure 4-8 QoS Global Configuration page
2. Set radiobox On to enable QoS function.
3. Click Apply button to apply the changes.
4.3.2 Configure the QoS Classification
Abstract
Different tags are added to packets to facilitate the upper-layer server to identify packets
and the server to schedule packets based on tags.
For example, if the DSCP label packets are preferentially passed, other label packets
have a lower priority. Different packets can also be marked with different flags for chan-
nels with different priorities.
Steps
1. On the main page of the H3140, select Internet > QoS > Classification to the Clas-
sification page.
2. Click to create new QoS classification, see Figure 4-9.
SJ-20210621164956-009 | 2021-12-07(R1.0) 23