4 Configure the Internet
4.1.2 Check the 3G Status
Abstract
The section describes how to check the mobile network and 3G connection status.
Steps
Check Mobile Network
1. On the main page of the H3140, select Internet > WAN Status > 3G > Mobile Net-
work to the Mobile Network page. The signal strength can verify the network card is
plugged, see Figure 4-3.
Figure 4-3 Mobile Network
2. Click Refresh to refresh the information.
Check 3G Connection Status
3. On the main page of the H3140, select Internet > WAN Status > 3G > 3G Connec-
tion Status to the 3G Connection Status page, see Figure 4-4.
Figure 4-4 3G Connection Status
4. Click Refresh to refresh the information.
4.2 Configure the WAN
4.2.1 Configure the Ethernet Connection
Abstract
This procedure describes how to configure a broadband connection (WAN connection)
on the network side of the device, so that services (including data and videos) of users
can be connected to the external network through routing or bridging.
SJ-20210621164956-009 | 2021-12-07(R1.0) 17
To Next Page
Loading...
