Zte H3140 - Configure the Advanced Parameters of the WLAN

H3140 Maintenance Management Guide
Table 5-3 Parameter Descriptions for the Private WLAN SSID Configuration
Parameter Description
SSID Name The name of SSID.
SSID Hide Set radiobox On to hide the SSID information to prevent illegal
users.
Encryption Type Select Encryption Type.
WPA Passphrase Password to connect to the wireless network. The value range is
8 - 63.
Maximum Clients Maximum number of users that can access the SSID. The value
range is 1 - 64.
9. Click Apply button to apply the changes.
Note
Guest WLAN SSID Configuration refers to Private WLAN SSID Configuration.
5.2.2 Configure the Advanced Parameters of the WLAN
Abstract
WLAN Advanced provides the parameters of WLAN Advanced configuration features.
Steps
Access Control-Mode Settings
1. On the main page of the H3140, select Local Network > WLAN > WLAN Advanced
to the WLAN Advanced page.
2. Click Access Control-Mode Configuration the configuration page, see Figure 5-5.
Figure 5-5 Access Control-Mode Configuration Page
3. Configure the access control-mode configuration parameters.
Table 5-4 lists the access control-mode configuration parameters.
46 SJ-20210621164956-009 | 2021-12-07(R1.0)