5 Configure the Local Network
Parameter Description
Band Width Radio frequency bandwidth, including Auto,20 Mhz and 40 Mhz. De-
fault: Auto.
SGI Enable or disable SGI function.
Beacon Interval Interval for transmitting beacon frames, default: 100 ms.
Beacon frames are used for communicating with other AP devices or
network control devices to announce the WLAN presence.
Transmitting Power Level of radio signal transmitting power. A larger value indicates wider
coverage and the larger the value, the stronger the radio signal.Options:
100%
80%
60%
40%
20%
6. Click Apply button to apply the changes.
Note
WLAN global configuration (5 GHz) refers to WLAN global configuration (2.4 GHz).
Configure the Private WLAN SSID Configuration
7. Click Private WLAN SSID Configuration to the configuration page, see Figure 5-4.
Figure 5-4 Private WLAN SSID Configuration Page
8. Table 5-3 lists the private WLAN SSID configuration parameters.
SJ-20210621164956-009 | 2021-12-07(R1.0) 45
To Next Page
Loading...
