Zte Maven 2 - Extending the Battery Life; Powering Your Phone On;Off

9GETTING STARTED
1. Connect the adapter to the charging port.
2. Connect the charger to a standard AC
wall outlet. If the phone is on, you’ll see a
charging icon, such as or , appear in the
Status Bar.
3. Disconnect the charger when the battery is
fully charged.
Note: If the battery is extremely low, you may be
unable to power on the phone even when it is being
charged. In this case, try again aer charging the phone
for at least 20 minutes. Contact customer service if you still
cannot power on the phone aer prolonged charging.
Extending the Battery Life
Active applications, screen brightness levels, Bluetooth and Wi-Fi
usage, and GPS functionality can drain your battery. You can
follow the helpful tips below to conserve your battery power:
• Reduce the screen backlight time.
• Lower the screen brightness.
• Turn auto-sync, Wi-Fi, and Bluetooth o when not in use.
• Disable the GPS function when not in use. Most applications
using this function will periodically query the GPS satellites for
your current location; each query drains your battery.
Powering Your Phone On/O
• Press and hold the Power key to power on your phone.
• To turn it o, press and hold the Power key to open the
options menu. Tap Power o.