7GETTING STARTED
Getting Started
Installing the Nano-SIM Card and the Battery
Power o your phone before installing or
replacing the nano-SIM card.
1. Insert your ngernail into the slot at the
bottom le of the back cover, and li it
up gently.
2. Hold the nano-SIM card with the cut corner
oriented as shown, and slide it into the
card slot.
Important: To avoid damage to the phone,
do not use other kinds of SIM cards or a
non-standard nano-SIM card cut from a
SIM card. You can obtain a standard
nano-SIM card from your service provider.
3. Insert the battery by aligning the metal
contacts on the battery with the metal
contacts in the battery compartment.
Gently push down on the battery until it
clicks into place.
4. Align the back cover with the back of the
phone, and press the cover back into place.
Make sure all the tabs are secure and there
are no gaps around the cover.
To Next Page
Loading...
