12
Switching on Your Device
1. Turn the power switch on to get started. Make sure that the
phone is on hook before power on.
Notes:
Do not put anything on the top of the router. Do not lay routers to
overlap each other when using.
2. Wait 1 ~ 2 minutes after turning the router on before you use the
service. The 3G & POWER indicator should be lit on.
Notes:
When the router is turned off, an incoming caller will hear the prompt
like “The number you have dialed is currently unavailable.”
If the 3G LED is blinking constantly, try to move the router to another
location. The router takes 1~2 minutes to initialize, attach to the net-
work and obtain an IP address.
Power Supply
For normal operation, connect the router to the external power
adapter. In case of power failure or when there is no available exter-
nal power supply, the router will not work.
To Next Page
Loading...
Need help?
General
