Zte MF29A - Accessing the Internet; Accessing the Internet by Bridge Mode; Accessing the Internet by Cable Broadband

15
Notes: There will be a pop-up window to require the password.
Please check the label on the battery compartment of your device to
gain the SSID and preset password information.
4. Wait a moment, the connection between your device and the
client will be established successfully.
Accessing the Internet
Before accessing the internet, make sure;
1. Switch on the device.
2. Establish a connection between your device and the client.
Accessing the Internet by Bridge Mode
1. Login the WebGUI and set the Operation Mode as Bridge
Mode.
2. Connect the device with internet by WAN.
Accessing the Internet by Cable Broadband
1. Login the WebGUI and set the Operation Mode as Cable
Broadband.
2. Connect the device with internet by WAN.
3. Set WAN Connection in WebGUI.