14
Internet Access
The router does not require any drivers, and it supports all operating
systems with Ethernet LAN capability, such as Windows 2000, XP,
Vista, MAC OS X and Linux.
Note: All the parameter settings in this chapter are just for your ref-
erence. Please contact your service provider for detail.
Preparation
Establishing a connection between your device and
the client
Via RJ45 Ethernet cable
1. Connect your device and the client with the RJ45 Ethernet cable.
2. Power on your device.
The connection between your device and the client will be estab-
lished successfully a moment later.
Via Wi-Fi
1. Power on your device directly. It will take 1~2 minutes to
initialize, and then Wi-Fi LED is blinking.
2. Use your normal Wi-Fi application on the client to search the
available wireless network.
Notes: You need to check your Wireless Network Connection. Set
the client to obtain an IP address automatically in the Internet pro-
tocol (TCP/IP) properties, and the client will get an IP address like”
192.168.0.100”.
3. Select the SSID of your device, and then click Connect.
To Next Page
Loading...
Need help?
General
