41
Notes:
For the detailed operations about the client, please refer to the cli-
ent’s instruction.
U-Disk Master
1. Start up your device.
2. Launch the client device connected to your device.
3. Connect the storage devices (i.e.USB disk) to the USB port of
the device.
4. Select Start > Run of the computer.
5. Input \\192.168.0.1\, in the open eld and press OK.
6. Input User Name and Password. The default User Name is
admin, Password is admin. Then you can view storage devices.
To Next Page
Loading...
Need help?
General
