23
• Prole Selection: Choose the desired prole name.
• APN: Access Point Name.
• PDP Setting: PDP address mode. If a xed IP address is given
by your service provider, select Manual PDP. Otherwise select
the Auto PDP and the router will automatically obtain this
parameter.
• DNS: If a xed IP address is given by your service provider, then
choose Manual DNS. Otherwise, choose Auto DNS, and device
will automatically obtain parameters.
• Authentication: Password Authentication Protocol (PAP)
provides a simple method without encryption for the peer to
establish its identity using a 2-way handshake. Challenge-
Handshake Authentication Protocol (CHAP) is used to
periodically verify the identity of the peer using a 3-way
handshake.
• User Name: User name is used to obtain authentication from the
ISP when the connection is established
• Password: Password is used to obtain authentication from the
ISP when the connection is established.
Click Set default to set this prole as the default prole.
To Next Page
Loading...
Need help?
General
