31
If the Authentication type is WPA-PSK , WPA2-PSK or WPA-PSK/
WPA2-PSK , the bottom part of the configuration page displays
WPA parameters.
• WPA Algorithm: TKIP, AES or AUTO.
• Pass phrase: You can input hexadecimal digits up to 64
characters or input ASCII characters choose a length of 63
characters or less.
• Key Renewal Interval: Define how long the key should be
renew.
You can set Wireless MAC Filtering:
• Wireless Disable: If disabled, MAC address is not used to
control network access.
• Wireless Allow: Set the MAC address that is allowed to access
network.
• Wireless Reject: Set the MAC address that is not allowed to
access network.
Click Apply to conrm your conguration.
WPS
Select Wi-Fi Setting > WPS, the WPS conguration is shown in the
following gure:
Select Enable, click Apply ,the WPS settings are shown in the fol-
lowing gure:
To Next Page
Loading...
Need help?
General
