Note: all the necessary settings have been correctly saved in your USB modem
by ZTE. There is no need to change these default settings.
1. Connection
To ensure that the modem can connect the Internet properly, you should
configure the connection information first.
(1). Button description
Add: Add new configuration files.
View: View the selected configuration file.
Delete: Delete the selected configuration files.
Apply: Active the selected configuration files.
(2). Config File
Select “Add” to add new connection information to the system.
There are two parts of configuration information: Common and Advance.
The Common information includes: Config File, APN, User name.
The Advance information includes: DNS, PDP server, Authentication mode,
PDP Type. If network supports “Obtain server address automatically”, the
To Next Page
Loading...
