Zte MF30 User Manual

41
Web browser requirement:
It is suggested that you use IE browser to connect to the internet.
4.2 Settings
Do not change any settings unless instructed by your service provider. To
make changes to your settings you need to disconnect the router from the
network. After making changes reboot your router by turn off and on again.
4.2.1 Login
The router can be connected by Wi-Fi.
Firstly you should set to obtain an IP address automatically in the attribution
setting of Internet protocol(TCP/IP). After your computer gets the IP address
(like 192.168.0.101) from the router, open a web browser and type
“ http://192.168.0.1” in the address bar, and then input the username and
password.
User name: admin
Password: admin
Click Login to log in the router.
Note: If you check Save after you give user name and password, the router
will save them, next time when you want to log in the router with the same
user name and password, what you need to do is click Login.

Zte MF30 Specifications

General

Wi-Fi Standards	802.11b/g
Maximum Wi-Fi Speed	54 Mbps
Max Speed Downlink	7.2 Mbps
Max Speed Uplink	5.76 Mbps
Battery Capacity	1500 mAh
SIM Card Slot	Yes
Number of Connected Devices	Up to 5
Weight	80 g
Wi-Fi Security	WEP, WPA, WPA2
Operating Time	4 hours
Standby Time	100 hours
Device Type	Mobile Hotspot
Supported Operating Systems	Windows, Mac