2.4 Installation
1. Insert the (U)SIM card
This contains your phone number and acts as a store for your contacts. Insert
this face down into the carrier inside the back panel of the phone. Make sure it
is pushed all the way down as shown below:
Warning: Please power off the product and remove the external power
adapter before removing or inserting the (U)SIM card, if not, the product or
(U)SIM card may be damaged.
2. Insert the battery
○
1
Use the thumb catch at the bottom of the product to open the battery cover.
○
2
Insert the battery as shown with the contacts located against the gold springs.
○
3
Press the battery down flush into the case
○
4
Line the battery cover up correctly and press gently to close the case.
To Next Page
Loading...
Need help?
General
