Zte MF30 - Page 47

47
 APN Setting: APN address mode. If a fixed APN is provided by your
service provider, select Manual APN. Otherwise select the Auto APN,
and the router will automatically obtain this parameter.
 APN: Access Point Name.
 Dial No.: This dial number is used for data service connection.
 PDP Type: Packet Data Protocol (PDP) Type IP is recommended unless
service provider instructs others.
 PDP Setting: PDP address mode. If a fixed IP address is given by your
service provider, select Manual PDP. Otherwise select the Auto PDP
and the router will automatically obtain this parameter.
 DNS: If a fixed IP address is given by your service provider, then choose
Manual DNS. Otherwise, choose Auto DNS, and router will
automatically obtain parameters.
 Authentication: Password Authentication Protocol (PAP) provides a
simple method without encryption for the peer to establish its identity
using a 2-way handshake. Challenge-Handshake Authentication Protocol
(CHAP) is used to periodically verify the identity of the peer using a 3-