2.System Overview
This chapter introduces the installation, hardware, software and specification parameters,
namely:
⚫ Installation requirements and method
⚫ System structure of the hardware
⚫ Optional modules
⚫ Introduction and use of the software interface
2.1.Installer
The EXI1800 series Chemiluminescence Immunoassay Analyzer is only installed by the
technical service engineers of Zybio or its authorized agents, and you need to provide the
appropriate environment and space. When your analyzer needs to be relocated, please
contact the technical service engineers of Zybio or its local agents.
Upon receiving your analyzer, please notify the technical service engineers of Zybio and
its local agents immediately.
2.2.Damage examination
All products have passed strict inspection from Zybio before shipment. Upon receiving
your analyzer, please examine carefully before opening the packing box, and pay attention to
the presence of the following damage:
1) Inverted or deformed exterior package;
2) Obvious traces of wet water on the exterior package;
3) Obvious impingement on the exterior package;
4) The exterior package shows signs of being opened.
Please notify the technical service engineers of Zybio or its local agents as soon as the
above-mentioned damage is found. If the exterior package is intact, please open the packing
box in the presence of designated staffs from Zybio, and further examine:
1) The completeness of all components according to the packing list in the box;
2) The appearance of all devices for cracking, impingement, or deformation.
To Next Page