3) Close the cover of sample tray and reagent tray;
4) Turn down the power switch to power off the analyzer;
5) Check whether there are stains on the surface of the analyzer. If yes, please wipe
off the stains with a clean soft cloth;
6) Check the liquid waste container, if there is liquid waste, please empty the liquid
waste container;
7) Check the solid waste container, if there are waste cuvettes, please empty the
solid waste container.
When power off the analyzer, if you want to restart the analyzer,
please wait at least 10 seconds.
4.Software System Operation
4.1.Home page
After starting up normally, enter the user name and password to display the
home page. As showing in the figure below:
To Next Page