1) The barcode scanner located inside your analyzer is a laser
equipment. Please do not disassemble the device under any
circumstances. Otherwise, there is a risk of uncontrolled laser
radiation leakage;
2) The external handheld barcode scanner is a Class 2 laser
product, which is mainly used to scan item barcodes, master
calibration curves and substrate barcodes. When using a
barcode scanner, please do not face the laser of the scanner;
3) Barcode scanner BCL95 is a class 2 laser equipment.
Scanning rays (red) with an emission wavelength of 655 nm;
Maximum output (peak): 2.1 mW; Pulse duration: < 120 μs;
4) Carefully read the warning information on your analyzer to
avoid possible harmful laser radiation when installing,
debugging and maintaining your analyzer;
5) It is important to prevent laser rays or reflected laser rays!
Long-term visual exposure to laser radiation can cause retinal
injury.
1.4. Pictures
All pictures in this operation manual are used for illustrations or examples only, and are
not intended for other purposes.
To Next Page