Software System Operation
Basic operations
◼ Search
Enter the fault search interface, the search fields will be displayed: faults can be
searched by fault number, unit module, level, and time of occurrence.
◼ Reset
Reset and clear the search conditions, and all data will be displayed by default after
triggering the search.
◼ Delete
The user can delete the selected fault information freely, it is only for the deletion of
this page, and the records in [Maintenance]-[Log]- [Fault handling log] can’t be deleted.
1) After the fault is cleared, please delete the fault information,
otherwise it may affect the execution of cycle test and restrict the
execution of routine maintenance and regular maintenance;
2) If it is the self-fault handling by analyzer, the test is not stopped,
and the period test is finally completed, the trial completion will
not affect cycle test, routine maintenance and regular
maintenance.
4.8.System settings
Includes system settings, analyzer setting, report settings, department management,
and user settings, as shown in the figure below.
To Next Page
Loading...