Zybio EXI1820 - Reagents

Software System Operation
７６
3) Click [Edit], the editing interface will pop up, edit the QC information, same as
[Add].
◼ Delete QC
1) Select the QC items in [Item List];
2) Select the QC in [QC List];
3) Click the [Delete] to pop up the confirmation box;
4) Click the [OK] to delete, the corresponding QC test results are also deleted.
◼ QC request
1) Select the QC items in [Item List];
2) Select the QC in [QC List];
3) Click [QC Request], refer to 3.11.1 for specific operations.
◼ Cancel QC
1) Select the QC items in [QC List];
2) Select the QC in [QC List];
3) Click [Cancel Request], refer to 3.11.1 for specific operations.
4.5.Reagents
Click [Reagents] on the home page to enter the reagent management interface,
including reagent and other consumables, as shown in the following figure: