◼ Delete
1) Select one piece of sample result in [Sample List];
2) Click [Delete] to delete the sample and all test items corresponding to the
sample.
4.4.QC
Click [QC] on the home page to enter the QC interface, as shown in the following
figure:
Figure 0-4 QC interface
Basic operations
◼ Add new QC
1) Select the QC item in [Item List] of QC;
2) Click [Add], QC setting interface will pop up, input QC information, refer to 3.11.1
for specific operations.
◼ Edit QC
1) Select the QC items in [Item List];
2) Select QC in [QC List];
To Next Page