1) The sample screening drop-down box contains four options: [Today’s Samples],
[All Sample], [Retest Samples] and [Test Statistics]. Users can search samples
by the way according to different requirements;
2) Search screening, click [Search], and perform conditional search on the sample
results according to barcode, patient ID, name, test mode, sample type and
status of sample.
◼ Review
For the tested samples, click [Review one by one] for a single sample or [One-click
review] for all samples;
◼ Transmission
When the sample test is completed, the test results will upload to the LIS server
automatically; Or transmit sample results by manually.
1) Select the sample result to be uploaded in [Sample List];
2) Click [Transmission] to open LIS transmission function.
◼ Print
1) Select the samples to be printed, click [Print] to enter print interface;
2) Provide operation options:
⚫ Print sample report: Print sample report;
⚫ Sample combined printing: Combined printing sample report, the default
display is the first patient information.
3) Operation content selection:
⚫ Print selected sample;
⚫ Print all samples.
4) After setting, click [OK] to print the result.
After the setting is complete, click [OK] to print the results.
◼ Backup
The system has the function of automatically storing data on the hard disk of the
computer. However, if the hard disk data is deleted or the hard disk is damaged due to
other reasons, the data cannot be recovered. Please upload the analysis data and
measurement parameters to software such as LIS or backup them to other mobile
storage devices regularly. To read the backup, please contact the service technical
service engineers of Zybio or its local agents.
1) Click [Backup];
2) The backup setting box will pop up, select the mobile hard disk backup path;
3) Click [Backup], the backup is successful.
To Next Page
Loading...