Zybio EXI1820 - Page 85

Software System Operation
８５
Figure 0-11 Maintenance interface
Basic parameters explanation:
Parameters
Meaning
Operation
Whole machine reset
All components of the
analyzer will reset after
triggering
No operation required
Probe reset
The probe module will reset,
after triggering
No operation required
Gripper reset
The gripper module will
reset after triggering
No operation required
Cleaning tray reset
The cleaning tray module
will reset
No operation required
Incubation tray reset
The incubation tray module
will reset
No operation required
Sample tray reset
The sample tray module will
reset
No operation required
Reagent tray reset
The reagent tray module will
reset.
No operation required
Cuvette loader reset
The cup loader module will
reset
No operation required
Cleaning and perfusion
Select the times of perfusion
after triggering, and
automatically perfusion
No operation required
The first phase infusion of
the cleaning tray (manual).
Manually take out the
injection probe to perform
the perfusion operation
Technical service engineers
will help do it
The second phase infusion
of the cleaning tray
(manual).
Manually take out the
injection probe to perform
the perfusion operation
Technical service engineers
will help do it
The third phase infusion of
the cleaning tray (manual).
Manually take out the
injection probe to perform
Technical service engineers
will help do it