ZyXEL Communications IES-612-51A - Page 269

Chapter 41 Commands Summary
IES-612-51A User’s Guide
269
rstp disable Turn system’s rstp off. H/H
rstp priority <priority> Set system rstp’s priority. H/H
rstp hellotime <hellotime sec> Set system rstp’s hello time. H/H
rstp maxage <maxage sec> Set system rstp’s max age. H/H
rstp fwdelay <fwdelay sec> Set system rstp’s forward delay
time.
H/H
rstp port show Display enet port rstp status. M/L
rstp port enable <portlist> Set enet port to enable rstp. H/H
rstp port disable <portlist> Set enet port to disable rstp. H/H
rstp port priority <portlist>
<priority>
Set enet port’s rstp priority. H/H
rstp port pathcost <portlist>
<pathcost>
Set enet port’s rstp pathcost. H/H
dhcprelay show Displays DHCP relay settings. L/L
dhcprelay enable Turns on DHCP relay. H/H
dhcprelay disable Turns off DHCP relay. H/H
dhcprelay server
set
<vid> <primary-
server>
[<secondary-
server>]
Set DHCP server IP address
where the DHCP request will
forward to
<vid>: VLAN
< primary-server >: IP address for
primary server
< secondary-server >: IP address
for secondary server
Maximum 32 entries can be
configured.
Default: (empty list)
M/H
dhcprelay server
delete
<vid> [<primary-
server>]
Delete DHCP server for 1 VLAN M/H
dhcprelay server
active
<vid> <active-
server>
Activate primary or secondary
DHCP server for 1 VLAN
M/H
dhcprelay
relaymode
<mode> DHCP relay mode, auto/both M/H
dhcprelay option82
enable
Turns on the DHCP relay agent
information (Option 82) feature.
M/H
dhcprelay option82
disable
Turns off the DHCP relay agent
information (Option 82) feature.
M/H
dhcprelay option82
set
<relay info> Adds the specified information for
the relay agent.
M/H
dhcprelay
opt82sub2 enable
Turns on option 82 sub-option 2 M/H
dhcprelay
opt82sub2 disable
Turns off option 82 sub-option 2 M/H
dhcprelay
opt82sub2 set
<relay info> Adds the specified information for
sub-option 2
M/H
Table 88 Commands (continued)
CLASS COMMAND PARAMETERS DESCRIPTION P