ZyXEL Communications IES-612-51A - Page 268

Chapter 41 Commands Summary
IES-612-51A User’s Guide
268
igmpsnoop mvlan
set
<vid>
<portlist>:<F<T|U>
|X> [<portlist>:
<F<T|U>|X> ...]
[name]
Configures a MVLAN entry. H/H
igmpsnoop mvlan
show
<vlanlist> Show multicast vlans,
Include group information
M/L
igmpsnoop mvlan
disable
<vid> Turns off a MVLAN entry. H/H
igmpsnoop mvlan
enable
<vid> Turns on a MVLAN entry. H/H
igmpsnoop mvlan
delete
<vlanlist> Removes a MVLAN entry. H/H
igmpsnoop mvlan
group set
<vid> <index>
<start_mcast_ip>
<end_mcast_ip>
Create a multicast to VLAN
translation entry.
up to 16 entries
<index>: 1~16,
Note: IP address in each entry
should be disjointed
H/H
igmpsnoop mvlan
group delete
<vid> <index> Delete a multicast to VLAN
translation entry.
H/H
igmpsnoop mvlan
group show
<vlanlist> Show a multicast to VLAN
translation entry.
M/L
igmpfilter set <portlist> <name> Sets an ADSL port(s) to use an
IGMP filter profile.
H/H
igmpfilter show [portlist] Displays which IGMP filter profile
an ADSL port(s) is using.
M/L
igmpfilter profile
set
<name> <index>
<startip> <endip>
Configures an IGMP filter profile. H/H
igmpfilter profile
delete
<name> Removes an IGMP filter profile. H/H
igmpfilter profile
show
[name] Displays an IGMP filter profile’s
settings.
M/L
queuemap show Displays the system’s priority level
to ENET queue mapping.
M/L
queuemap set <priority> <queue> Maps a priority level to a ENET
queue.
H/H
garptimer show Display the system’s garp
settings.
M/L
garptimer join <join msec> Set system’s garp join time. H/H
garptimer leave <leave msec> Set system’s garp leave time. H/H
garptimer leaveall <leaveall msec> Set system’s garp leaveall time. H/H
rstp show Display the system’s rstp settings. M/L
rstp enable Turn system’s rstp on. H/H
Table 88 Commands (continued)
CLASS COMMAND PARAMETERS DESCRIPTION P