ZyXEL Communications IES-612-51A - Page 271

Chapter 41 Commands Summary
IES-612-51A User’s Guide
271
acl set <portlist> <vpi>
<vci> <profile>
Apply an acl profile to a PVC
Max. 8 profiles per port
M/H
acl show [portlist] [<vpi>
<vci>]
Show acl profile setting for a PVC L/L
dhcpsnoop disable < portlist > Disable ip spoofing for a port M/H
dhcpsnoop enable < portlist > Enable ip spoofing for a port M/H
dhcpsnoop flush < portlist > Flush DHCP snooping table for a
port
M/H
dhcpsnoop show <portlist> Display DHCP snooping result on
a port
L/L
dscp show [portlist] Displaying per port DSCP setting L/L
dscp enable <portlist> Enable ADSL/ENET ports to use
DSCP mapping
M/H
dscp disable < portlist > Disable ADSL/ENET ports to use
DSCP mapping
M/H
dscp map show [portlist] Displaying the DSCP code to
802.1p mapping table
L/L
dscp map set <srccp> <mappri>
<srccp>: source
code point, 0~63,
example:
1,3~5,10~15
<mappri> :
mapping priority,
0~7
Setting the DSCP code to 802.1p
mapping table
M/H
vlan show <vlanlist> Displays VLAN settings. M/L
vlan portshow [portlist] Displays the port(s) VLAN
settings.
M/L
vlan set <vid>
<portlist>:<F<T|U>
|X|N> [<portlist>:
<F<T|U>|X|N> ...]
[name]
Configures a VLAN entry. H/H
vlan enable <vid> Turns on a VLAN entry. H/H
vlan disable <vid> Turns off a VLAN entry. H/H
vlan delete <vlanlist> Removes a VLAN entry. H/H
vlan pvid <portlist> <pvid> Sets the PVID (Port VLAN ID)
assigned to untagged frames or
priority frames (0 VID) received on
this port(s).
H/H
vlan priority <portlist>
<priority>
Sets a port’s default IEEE 802.1p
priority.
H/H
vlan gvrp <portlist>
<enable|disable>
Set the port(s) to enable or
disable gvrp.
H/H
Table 88 Commands (continued)
CLASS COMMAND PARAMETERS DESCRIPTION P