ZyXEL Communications IES-612-51A - Page 272

Chapter 41 Commands Summary
IES-612-51A User’s Guide
272
vlan frametype <portlist>
<all|tag>
Sets the specified DSL port to
accept tagged, untagged or
Ethernet frames (or both).
Note: enet1, enet2 are fixed at
‘all’.
H/H
vlan cpu show Displays the VLAN ID of the
Management VLAN.
M/~
vlan cpu set <vid> Sets the VLAN ID of the
Management VLAN.
H/~
mac flush Clears learned MAC addresses
from the forwarding table.
H/H
mac agingtime show Displays the MAC aging out time
period.
M/L
mac agingtime set <sec,
10..10000|0:disabl
ed>
Sets the MAC aging out time
period.
H/H
mac antispoofing
show
Show the MAC antispoofing
status
M/L
mac antispoofing
enable
Turns on the MAC antispoofing H/H
mac antispoofing
disable
Turns off the MAC antispoofing H/H
mac count show [portlist] Displays the system’s current
MAC address count settings.
M/L
mac count enable <portlist> Turns on the MAC address count
filter for an ADSL port(s).
H/H
mac count disable <portlist> Turns off the MAC address count
filter for an ADSL port(s).
H/H
mac count set <portlist> <count> Sets the MAC address count filter
for an ADSL port(s).
H/H
mac filter show [portlist] Displays MAC filter settings. M/L
mac filter enable [portlist] Turns on the MAC filter. H/H
mac filter disable [portlist] Turns off the MAC filter. H/H
mac filter mode <port>
<accept|deny>
Sets the MAC filter to accept or
deny.
H/H
mac filter set <port> <mac>
[<mac> <mac> ...]
Adds a MAC filter MAC entry on
an ADSL port(s).
H/H
mac filter delete <port> <mac>
[<mac> <mac> ...]
Removes a MAC filter MAC entry
on an ADSL port(s).
H/H
pktfilter show [portlist] Display packet filter settings. M/L
pktfilter set set <portlist>
<filter>
Set packet filter for port H/H
pktfilter
pppoeonly
pppoeonly
<portlist>
Set packet filter to pppoe only for
port.
H/H
dot1x show [portlist] Display dot1x settings. M/L
dot1x enable Turn on dot1x. H/H
Table 88 Commands (continued)
CLASS COMMAND PARAMETERS DESCRIPTION P