Chapter 6 WAN
LTE3301 Series User’s Guide
60
IPv6 Address
Range(End)
If you select Stateful (DHCPv6), specify the range of IPv6 addresses from which
the DHCPv6 server assigns to the clients. Enter the largest value of the last block of
the IPv6 addresses which are to be allocated.
IPv6 Address Lifetime If you select Stateful (DHCPv6), specify how long (in minutes) the IPv6 addresses
remain valid.
Table 16 Network > WAN > IPv6 (continued)
LABEL DESCRIPTION
To Next Page
Loading...
