Chapter 12 Firewall
NBG-418N v2 User’s Guide
114
VPN Passthrough Select the checkbox to enable the advanced pass through features:
• PPTP Passthrough: Select this option to allow the NBG-418N v2 to pass through
VPN traffic using PPTP.
• L2TP Passthrough: Select this option to enable computers on your LAN to make
L2TP VPN connections to servers on the Internet.
• IPSEC Passthrough: Select this option to allow the NBG-418N v2 to pass through
VPN traffic using the IPsec protocol.
Apply Click Apply to save the settings.
Reset Click Reset to start configuring this screen again.
Table 48 Security > Firewall > Services (continued)
LABEL DESCRIPTION
To Next Page
Loading...
