Chapter 12 AP Profile
NWA50AX/NWA90AX/NWA55AXE Series User’s Guide
108
These screens’ options change based on the Security Mode selected. The following table
describes the labels in this screen.
Table 42 Configuration > Object > AP Profile > SSID > Security List > Add/Edit Security Profile> Security
Mode: none
LABEL DESCRIPTION
General Settings
Profile Name Enter up to 31 alphanumeric characters for the profile name. This name is only visible in
the Web Configurator and is only for management purposes. Spaces and underscores
are allowed.
Security Mode Select a security mode from the list: none, enhanced-open, wep, wpa2, wpa2-mix or
wpa3.
enhanced-open uses Opportunistic Wireless Encryption (OWE) which encrypts the
wireless connection when possible.
Authentication Settings
Enterprise Select this to enable 802.1X secure authentication with a RADIUS server.
ReAuthentication
Timer
Enter the interval (in seconds) between authentication requests. Enter a 0 for unlimited
time.
Advance
Note: Click on the Show Advanced Settings button to show the fields describe below.
Idle Timeout Enter the idle interval (in seconds) that a client can be idle before authentication is
discontinued.
Radius Settings
Primary / Secondary
Radius Server Activate
Select this to have the Zyxel Device use the specified RADIUS server.
Radius Server IP
Address
Enter the IP address of the RADIUS server to be used for authentication.
Radius Server Port Enter the port number of the RADIUS server to be used for authentication.
Radius Server Secret Enter the shared secret password of the RADIUS server to be used for authentication.
Primary / Secondary
Accounting Server
Activate
Select the check box to enable user accounting through an external authentication
server.
Accounting Server
IP Address
Enter the IP address of the external accounting server in dotted decimal notation.
Accounting Server
Port
Enter the port number of the external accounting server. The default port number is 1813.
You need not change this value unless your network administrator instructs you to do so
with additional information.
Accounting Share
Secret
Enter a password (up to 128 alphanumeric characters) as the key to be shared between
the external accounting server and the Zyxel Device. The key must be the same on the
external accounting server and your Zyxel Device. The key is not sent over the network.
Accounting Interim
Update
This field is available only when you enable user accounting through an external
authentication server.
Select this to have the Zyxel Device send subscriber status updates to the accounting
server at the interval you specify.
Interim Update
Interval
Specify the time interval for how often the Zyxel Device is to send a subscriber status
update to the accounting server.
General Server Settings
NAS IP Address If the RADIUS server requires the Zyxel Device to provide the NAS (Network Access Server)
IP address attribute, enter it here.
To Next Page
Loading...
