Chapter 12 AP Profile
NWA50AX/NWA90AX/NWA55AXE Series User’s Guide
109
Figure 73 Configuration > Object > AP Profile > SSID > Security List > Add/Edit Security Profile> Security
Mode: enhanced-open
The following table describes the labels in this screen.
NAS Identifier If the RADIUS server requires the Zyxel Device to provide the NAS (Network Access Server)
identifier attribute, enter it here. The NAS identifier is to identify the source of access
request. It could be the NAS’s fully qualified domain name.
OK Click OK to save your changes back to the Zyxel Device.
Cancel Click Cancel to exit this screen without saving your changes.
Table 43 Configuration > Object > AP Profile > SSID > Security List > Add/Edit Security Profile> Security
Mode: enhanced- open
LABEL DESCRIPTION
General Settings
Profile Name Enter up to 31 alphanumeric characters for the profile name. This name is only visible in
the Web Configurator and is only for management purposes. Spaces and underscores
are allowed.
Security Mode Select a security mode from the list: none, enhanced-open, wep, wpa2, wpa2-mix or
wpa3.
enhanced-open uses Opportunistic Wireless Encryption (OWE) which encrypts the
wireless connection when possible.
Authentication Settings
Transition Mode This option only displays if you set the Security Mode to wpa3 or enhanced-open. This
option is always enabled for backwards compatibility. This creates two virtual APs (VAPs)
with a primary (wpa3 or enhanced-open) and fallback (wpa2 or none) security method.
Advance
Note: Click on the Show Advanced Settings button to show the fields described below.
Idle Timeout Enter the idle interval (in seconds) that a client can be idle before authentication is
discontinued.
Table 42 Configuration > Object > AP Profile > SSID > Security List > Add/Edit Security Profile> Security
Mode: none (continued)
LABEL DESCRIPTION
To Next Page
Loading...
