Chapter 13 Remote Management
P-870HW-51a v2 User’s Guide
130
Figure 68 TR-069
The following table describes the fields in this screen.
Table 44 TR-069 Client
LABEL DESCRIPTION
Inform Select Enable to activate remote management via TR-069 on the WAN.
Otherwise, select Disable.
Inform Interval Enter the time interval (in seconds) at which the ZyXEL Device sends information
to the auto-configuration server.
ACS URL Enter the URL or IP address of the auto-configuration server.
ACS User Name Enter the TR-069 user name for authentication with the auto-configuration
server.
ACS Password Enter the TR-069 password for authentication with the auto-configuration server.
WAN Interface
used by TR-069
client
Select a WAN interface through which the TR-069 traffic passes.
Connection
Request
Authentication
Select this option to enable authentication when there is a connection request
from the ACS.
Connection
Request User
Name
Enter the connection request user name.
When the ACS makes a connection request to the ZyXEL Device, this user
name is used to authenticate the ACS.
Connection
Request Password
Enter the connection request password.
When the ACS makes a connection request to the ZyXEL Device, this password
is used to authenticate the ACS.
Connection
Request URL
This shows the connection request URL.
The ACS can use this URL to make a connection request to the ZyXEL Device.
Apply/Save Click this button to save your changes back to the ZyXEL Device.
Cancel Click Cancel to begin configuring this screen afresh.
To Next Page
Loading...
