ZyXEL Communications P-870HW-51A V2 - Figure 13 Zyxel Utility: Profile Security; Figure 14 Zyxel Utility: Profile Encryption; Figure 15 Profile: Wireless Protocol Settings

Chapter 2 Tutorials
P-870HW-51a v2 User’s Guide
37
3 Give the profile a descriptive name (of up to 32 printable ASCII characters). Select
Infrastructure and either manually enter or select the AP's SSID in the Scan Info table
and click Select.
4 Choose the same encryption method as the AP to which you want to connect (In this
example, WPA-PSK).
Figure 13 ZyXEL Utility: Profile Security
5 This screen varies depending on the encryption method you selected in the previous
screen. Enter the pre-shared key and leave the encryption type at the default setting.
Figure 14 ZyXEL Utility: Profile Encryption
6 In the next screen, leave both boxes checked.
Figure 15 Profile: Wireless Protocol Settings.
7 Verify the profile settings in the read-only screen. Click Save to save and go to the next
screen.