Chapter 3 Introducing the Web Configurator
P-870HW-51a v2 User’s Guide
41
The icon provides the following function.
3.2.2 Navigation Panel
Use the menu items on the navigation panel to open screens to configure ZyXEL Device
features. The following tables describe each menu item.
Table 2 Web Configurator Icon in the Title Bar
ICON DESCRIPTION
Help: Click this icon to open up help screens.
Table 3 Navigation Panel Summary
LINK TAB FUNCTION
Status This screen shows the ZyXEL Device’s general device and network status
information. Use this screen to access the statistics and client list.
Network
WAN Internet
Connection
Use this screen to configure ISP parameters, WAN IP address assignment,
DNS servers and other advanced properties.
More
Connections
Use this screen to configure additional WAN connections.
LAN IP Use this screen to configure LAN TCP/IP DHCP settings.
Client List Use this screen to view current DHCP client information and to always
assign specific IP addresses to individual MAC addresses (and host
names).
IP Alias Use this screen to partition your LAN interface into subnets.
Wireless LAN General Use this screen to configure the wireless LAN settings and WLAN
authentication/security settings.
WPS Use this screen to enable WPS (Wi-Fi Protected Setup) and view the WPS
status.
WPS Station Use this screen to use WPS to set up your wireless network.
MAC Filter Use this screen to configure the ZyXEL Device to give exclusive access to
specific wireless clients or exclude specific wireless clients from accessing
the ZyXEL Device.
Advanced Setup Use this screen to configure the advanced wireless LAN settings.
NAT Port Forwarding Use this screen to make your local servers visible to the outside world.
Security
IP Filter Incoming This screen shows a summary of the IP filtering rules, and allows you to
add or remove an incoming IP filtering rule that allows incoming traffic from
the WAN.
Advanced
Static Route IP Static Route Use this screen to configure IP static routes to tell your device about
networks beyond the directly connected remote nodes.
QoS General Use this screen to enable QoS.
Queue Setup
Use this screen to configure QoS queues.
Class Setup Use this screen to define a classifier.
Dynamic DNS This screen allows you to use a static hostname alias for a dynamic IP
address.
To Next Page
Loading...
