P-870HW-51a v2 User’s Guide
147
CHAPTER 16
Logs
16.1 Overview
This chapter contains information about configuring general log settings and viewing the
ZyXEL Device’s logs.
The web configurator allows you to choose which categories of events and/or alerts to have
the ZyXEL Device log and then display the logs or have the ZyXEL Device send them to a
syslog server.
16.1.1 What You Can Do in this Chapter
•The View Log screen lets you see the logs for the categories that you selected in the Log
Settings screen (Section 16.2 on page 147).
•The Log Settings screen lets you configure to where the ZyXEL Device is to send logs
and which logs and/or immediate alerts the ZyXEL Device is to record (Section 16.3 on
page 148).
16.2 The View Log Screen
Click Maintenance > Logs to open the View Log screen. Use the View Log screen to see the
logs for the categories that you selected in the Log Settings screen (see Section 16.3 on page
148).
The log wraps around and deletes the old entries after it fills.
Figure 86 Maintenance > Logs > View Log