Chapter 4 Status Screens
P-870HW-51a v2 User’s Guide
45
Memory
Usage
This field displays what percentage of the ZyXEL Device’s memory is currently
used. Usually, this percentage should not increase much. If memory usage does
get close to 100%, the ZyXEL Device is probably becoming unstable, and you
should restart the device. See Section 17.4 on page 154, or turn off the device
(unplug the power) for a few seconds.
Interface Status
Interface This column displays each interface the ZyXEL Device has.
Status This field indicates whether or not the ZyXEL Device is using the interface.
For the DSL interface, this field displays NoSignal (line is down) or Up (line is up
or connected).
For the LAN interface, this field displays Up when the ZyXEL Device is using the
interface and Disabled when the ZyXEL Device is not using the interface.
For the WLAN interface, it displays Up when WLAN is enabled or Disabled when
WLAN is not active.
Rate For the LAN interface, this displays the port speed and duplex setting.
For the DSL interface, it displays the downstream and upstream transmission rate.
For the WLAN interface, it displays the maximum transmission rate.
More Status
WAN Service
Statistics
Click this link to view packet specific statistics of the WAN connection(s). See
Section 4.1.1 on page 46.
Route Info Click this link to view the internal routing table on the ZyXEL Device. See Section
4.1.2 on page 47.
WLAN Station
List
Click this link to display the MAC address(es) of the wireless stations that are
currently associating with the ZyXEL Device. See Section 4.1.3 on page 47.
LAN Statistics Click this link to view packet specific statistics on the LAN and WLAN interfaces.
See Section 4.1.4 on page 48.
Client List Click this link to view current DHCP client information. See Section 4.1.5 on page
50.
Table 4 Status Screen
LABEL DESCRIPTION
To Next Page
Loading...
